GEODELFT MFOUNDATION 5.1.2.12 锥形物穿透检验
软件简介—SoftWare Description: GEODELFT MFOUNDATION 5.1.2.12 锥形物穿透检验

在1930年GeoDelft开始进行锥形物穿透检验(CPT-Cone Penetration Test)。在20年时间进化成为电气锥形物，被若干种国家和国际的专利所承认。CPT测试在荷兰是一项标准的土壤检验，如同他们精确，快速与使用有效的成本。 Mfoundation 依循荷兰与比利时的指标，第一个MFoundation被用来建立和最佳化设计，在这个程序自动最佳化选择中说明使用者对有效地建立和正确的计划。一旦，完成计划，MFoundation能在指定形式的详尽报告中，完成计划代码检查。它具有否决和重新规定各种各样的计划代码参数的能力，而被工程师应用于特定计算时的使用者定义基础型态和因素。 In the 1930’s GeoDelft started the development of the Cone Penetration Test (CPT). In twenty years time this evolved to the electrical cone, for which several national and international patents were granted. CPT testing is the standard soil test in the Netherlands, as they are accurate, fast and cost efficient. Since then it is impossible to imagine soil investigations in soft soil countries without the “Dutch Cone” test. Through CPT tests cone resistance, as well as skin friction is measured along the friction sleeve near the cone. These properties are ideal for the design of piled foundations, where both pile base resistance and pile shaft resistance are important. Foundation on tension piles Based on CPT test results, calculation techniques and design codes have been developed for the design of piled foundations in the Netherlands and Belgium. Since 1990 GeoDelft has been involved in the development of software for foundation design. This has resulted in design and verification software for bearing piles, tension piles and shallow foundations. General MFoundation follows the Dutch and Belgium guidelines. First MFoundation is used to create and optimize a design. In this process automatic optimization options assist the user to efficiently create and fine tune a design. Once the design has finished MFoundation can perform a design code check resulting in a detailed report for the given situation. The ability to overrule and redefine various design code parameters allows MFoundation to be used by engineers in specialized calculations using user-defined foundation types and factors. Some specific features in MFoundation are: Soil data definition: MFoundation requires input data from Cone Penetration Tests (CPT). Importing CPT data is possible in several formats, including the Geotechnical Exchange Format (GEF). The automatic CPT interpretation tool provides soil-type dependent proposals, including design code based parameters proposals. Preliminary design of piles: MFoundation provides simultaneous results of bearing capacity and required length for different pile types and different soil conditions. Pile group interaction: In calculations, the effect of pile group interaction on settlement is included as well as on bearing capacity for the selected pile type and pile plan. Design of shallow foundations: Foundation dimensions can be optimized. Also the required width for strip foundations and the capacity and stability of shallow foundations can be checked. Code-based verification: A complete verification report can be generated in Dutch and English. Standard parameters: All standard parameters provided by NEN and CUR (such as soil parameters as provided by table 1, NEN 6740 and pile type parameters provided by NEN 6743 and CUR 2001-4) are incorporated within MFoundation for easy and fast selection.