DELFT GEOSYSTEMS MFoundation v4.7.1.7 (建筑用计算工具)
软件简介—SoftWare Description: DELFT GEOSYSTEMS MFoundation v4.7.1.7 (建筑用计算工具)

一款基于代码的基础设计的一个强有力的的建筑用计算工具软件。友好的图形用户界面，可简化数据输入和结果。 Based on CPT test results, calculation techniques and design codes have been developed for the design of piled foundations in the Netherlands and Belgium. Since 1990 GeoDelft has been involved in the development of software for foundation design. This has resulted in design and verification software for bearing piles, tension piles and shallow foundations. General MFoundation follows the Dutch and Belgium guidelines. First MFoundation is used to create and optimize a design. In this process automatic optimization options assist the user to efficiently create and fine tune a design. Once the design has finished MFoundation can perform a design code check resulting in a detailed report for the given situation. The ability to overrule and redefine various design code parameters allows MFoundation to be used by engineers in specialized calculations using user-defined foundation types and factors. Some specific features in MFoundation are: Soil data definition: MFoundation requires input data from Cone Penetration Tests (CPT). Importing CPT data is possible in several formats, including the Geotechnical Exchange Format (GEF). The automatic CPT interpretation tool provides soil-type dependent proposals, including design code based parameters proposals. Preliminary design of piles: MFoundation provides simultaneous results of bearing capacity and required length for different pile types and different soil conditions. Pile group interaction: In calculations, the effect of pile group interaction on settlement is included as well as on bearing capacity for the selected pile type and pile plan. Design of shallow foundations: Foundation dimensions can be optimized. Also the required width for strip foundations and the capacity and stability of shallow foundations can be checked. Code-based verification: A complete verification report can be generated in Dutch and English. Standard parameters: All standard parameters provided by NEN and CUR (such as soil parameters as provided by table 1, NEN 6740 and pile type parameters provided by NEN 6743 and CUR 2001-4) are incorporated within MFoundation for easy and fast selection.