ADAPT PT 8.0
软件简介—SoftWare Description: ADAPT PT 8.0 结构设计

::::::English Description::::::

Since 1981, the Industry’s standard and choice of consulting engineers worldwide for an easy-to-use, efficient, and reliable production tool. This software is based on the proven Equivalent Frame Technology and  features the following modeling, analysis and design
 capabilities:
       Modeling Capabilities
           o Project parameters entered using easy to learn and use design wizard
           o Bonded (grouted) and unbonded post-tensioning
           o One-way and two-way floor systems and beam frames  
           o Multiple beam cross-sections: rectangular, T, L  and I   
           o Drop caps, drop panels, steps above and below  the slab
           o 3D solid model viewer for visual verification of input geometry
           o Imports input data for design strip from ADAPT- Builder suite of programs
      Analysis Capabilities
           o Equivalent frame or simple frame method of  analysis
           o Allowance for cracking in deflection  calculation of beams and one-way slab systems
           o Calculation of long-term losses due to creep, shrinkage, and relaxation in prestressing
           o Friction and elongation calculations  Design and Automatic Code Checks
           o Automatically generates first-pass post- tensioning design optimized for:
                 + User-specified range of precompression
                 + Allowable tensile and compression stress limits  
                 + User-specified range of dead load balancing
           o Interactive design summary page (Recycle Window) gives overview of analysis results and allows for rapid optimization
          o Graphical display of tendon profile eliminates errors while editing post-tensioning
          o Graphical display of stress levels against user specified stress limits while editing post-tensioning allows the user to immediately see the effects of the changes on the design!
         o Beam shear and punching shear checks
         o Reinforcement check for strength and minimum requirements of the code
          o Design of reinforcement for lateral load cases
      Output and Reports
          o A graphical display of the structural model and tendon profile
          o Graphical and tabular display of location,length and amount of required reinforcement
      Licensing Options
          o Multi-license network or stand-alone versions

输出的选项中也包含以图形显示所有重要设计数据的摘要报告，可以直接转给结构图使用也可以收录在结构计算书中，图形的摘要报告中包包含:

含后拉预力钢腱在内的构件立面图
后拉预力钢腱的配置 (post-tensioning profile)，控制点的高程 ( elevation of control points) 与后拉预力值与钢腱的股数 ( PT-force/number of strands )
整支构件上非预力钢筋的需求数量、位置与长度
单向板或冲孔剪力设计之结果
设计者的备注 (Designer’s comments)
DXF 输出
因为几何断面的选择非常自由，所以这个软件除了传统的房屋与停车场结构外还可以设计箱型梁的桥 (box girder bridges)，以及工字梁 ( I-girders)。 ADAPT-PT 的速度快、上手快也是世界上以生产为导向的顾问工程师的首选。

ADAPT-PT 提供两种版本，较低价的标准板 (Standard) 与加强板 (Plus)，除了标准板有五个跨度与两个悬臂的限制以外两个版本是完全相同的。

ADAPT-PT 是可以独立作业的程序，但是当与ADAPT-Builder共用时，它可以接收由 ADAPT-Builder 以图形产生的输入数据。 有关这项功能在标题为 ADAPT-Builder 的详细功能网页下有更详细的说明。

V7.20支持WINDOWS XP SP2
 

本软体�裼醚橹す�的等值构架技术 (Equivalent Frame Technology) 并提供下列功能:

1.裹握 (填浆) 与非裹握之后拉预力
2.单向与双向楼版系统以及�殴辜�
3.组合式的�哦厦�: T, L, I
4.柱冠、托肩及托版，托版可在楼版之上或下
5.计算单向版系统的挠度 (deflection) 时可以考虑开裂 (cracking) 情况

ADAPT-PT 内含:
1.计算因潜变 (creep)、乾缩 (shrinkage) 与预力�弛 (relaxation) 所导致之长期预力损失
2.依强度以及规范的最低要求核算配筋量
3.核算�偶袅τ氤蹇准袅� (punching shear)

ADAPT-PT 提供:
1.图形显示结构模型与钢腱配置
2.图形与报表显示钢筋之位置、长度与需求量

一款在建筑和停车场建造中使用的专为梁、板层和地板而设计的后张力软件，它基于经过验证的Equivalent Frame Technology技术