ADAPT Builder ABI V2009 (预力混凝土桥梁分析与设计)

            ADAPT-ABI 是一套专门针对节块工法 (segmentally)
            或者传统工法的预力混凝土桥梁之分析与设计的软件。它除了提供服务荷载 (service load)
            所需之设计数据以外还提供施工阶段所需之几何 (geometry) 与应力 (stress) 控制数据。
            ADAPT-ABI 已经为全世界的桥梁设计工程师们服务了 15 年，并为很多知名桥梁的分析工作奠下基石。

            ADAPT-ABI 可以利用下列模块扩充功能 :

            ADAPT-Gen
            ADAPT-Moving Load
            ADAPT-Elongation
            施工阶段与完工后使用阶段之完整分析，并包含下列各项之安全验算工作 :
            平衡悬臂工法桥 (Balanced cantilever bridges)，场铸 (Cast-in-place) 或预铸
            (Precast)
            推进工法桥 (Incrementally launched bridges)
            逐跨工法桥 (Span-by-span bridges)
            以现场接合 (field splicing) 并加顶板 (topping slab) 之预铸预力梁桥
            (Precast-prestressed girder bridges)
            箱型梁桥 (Box girder bridges)
            采用外部预力之整修桥梁 (Bridge rehabilitation)
            完整的分析，从混凝土浇灌当天到 30 年后或更久，包含产生车辆荷重 (moving load generation)、荷载的组合
            (code combinations)、包络值 (enveloping)、施工荷载 (construction loads)、潜变
            (creep)、干缩 (shrinkage)、预力钢腱的松弛 (relaxation of the prestressing
            steel)、混凝土的龄期 (aging of the concrete) 还有温度效应 (temperature effects)

            ADAPT-ABI 是一套能作混凝土桥梁与框架在施工阶段与完工后的依时分析 (time-dependent analysis)
            的常规有限单元程序 (general finite element program)。ABI 能考虑新灌混凝土、随时间改变的潜变
            (creep)、干缩 (shrinkage)与预力钢腱的松弛 (relaxation in prestressing)、混凝土的龄期
            (aging of concrete)
            还有温度变化所导致的影响。杰出的图形接口能显示不同施工阶段的弯矩、剪力、应力与变形，本程序可以处理非预力混凝土、预铸
            (precast)、场铸 (cast-in-place)、先拉预力 (pre-tensioned) 或者后拉预力
            (post-tensioned) 的框架。本程序的本意是处理递增工法 (incrementally constructed)
            的桥梁与框架，如新增混凝土的混凝土框架整修工程、新加构件或修改现有的构件工程或者框架拆除工程等等，另外可以应用得到的是复合式施工
            (composite construction) 与斜张式结构 (cable-stay structures) 。ADAPT-ABI
            的基本模块 ADAPT-ABI Basic 是独立与完整的程序，其他的模块可以增强基本模块的功能。

            ADAPT-ABI 2009
            The all new ADAPT-ABI 2009 features a 3D modeling environment which
            allows the user to model any bridge structure graphically and to
            define and manage constructions stages more efficiently. The bridge
            structures may include tendons, loads and travel paths.
            The modeling environment lets the user import DWG/DXF drawings and
            allows the transformation of polygons into either 3D structural
            components or cross sections. Bridge segments and piers can be given
            any cross section and a section manager allows the user to define
            any cross sections to be used in a project. ABI 2009 includes an
            extendable moving load library which contains predefined load
            trains.
            ADAPT-ABI 2009 is a special-purpose program developed for the design
            and analysis of prestressed concrete bridges built either
            segmentally or conventionally. It provides information for geometry
            and stress control during construction, as well as design values for
            service load. ADAPT-ABI has been serving bridge design engineers
            worldwide for over 20 years, and has provided the foundation for
            analysis of many notable bridges.