GGU Gabion v2.10 (挡土墙结构稳定性分析)
                   

                  GGU Gabion v2.10 (挡土墙结构稳定性分析)
                   

            程序语言：英文
            软件信息：国外软件 / 商业软件 / 地理信息
            运行环境：/WinXP/Win2000/NT/Win9X/Me
            软件大小：3 MB
            下载级别：注册会员
            更新时间：2008-03-23
            推荐资源

            GGU Gabion v2.10 (挡土墙结构稳定性分析)
            德国GGU-SoftWare公司出品的工程软件之一，用于计算以分块堆砌方式构建的挡土墙的结构及稳定性。

            Calculation of Gabion Walls.

            The GGU-GABION program system allows the calculation and design of
            gabion walls and walls build by similar stackable elements

            The program system allows comfortable data input. The system is
            displayed on the screen. Every change in data is shown on the
            screen, so that optimum control of input data is guaranteed. A
            variety of graphical presentation possibilities, to a high standard
            of quality, allow you to present the calculation results according
            to your wishes.
            The working group 5.9.3 of the FGSV (Forschungsgesellschaft für
            Straßen und Verkehrswesen - German Research Group for Road and
            Traffic Systems) has developed a paper for the calculation of
            gabions. This paper represents the main basis for programming.
            The program was developed in early 1999, in part from previously
            existing program modules.
            Capabilities
            The GGU-GABION program has the following special capabilities (and
            maximum values):
            Almost any kind of definition of gabion bodies
            Base inclination of the gabion body
            50 soil layers
            5 benches on the active side
            5 benches on the passive side
            Calculations with active, increased active and at-rest earth
            pressure
            Active earth pressure coefficients, MOHR / COULOMB and user-defined
            values
            Passive earth pressure coefficients, MOHR / COULOMB, STRECK /
            WEIßENBACH, CAQUOT / KERISEl and user-defined values
            Calculation of settlements
            Calculation of external stability
            Verification of inner stability along the lines
            Comfortable interface to the slope stability program
            for fast investigations of terrain stability
            50 surcharge earth pressure figures
            20 block loads at any depth
            Static calculations of the wall via a two-dimensional rod structure
            program module on the basis of finite-element methods.
            Definition of up to 10 additional path boundary conditions (torsion,
            displacement for x and y) at any position.
            Definition of up to 10 additional force boundary conditions (moment,
            cross force and normal force) at any position.
            A variety of different earth pressure redistribution figures:
            - without redistribution
            - rectangular
            - 2 rectangles
            - triangular (choice of maximum at the top, center or at the bottom)
            - trapezoid
            - quadrilateral with maximum at the geogrid layers or in any
position
            - user-definable redistribution figure via definition of a polygon
            course

            The passive earth pressure can be above or in front
            After the system is calculated the earth pressure, water pressure,
            moment, horizontal force, vertical force and the relationship
            µ * V/H are automatically displayed on the screen. The screen
            presentation can be varied within wide limits.
            Presentation of the pressure line, the first and second core
            dimensions and the gravity axis.
            Six legends can be shown on the screen, containing the soil
            properties, general calculation information, any settlement
            information and principle design values. In this way, almost all
            initial calculation data are documented on the screen.
            The program works on the principle of "What you see is what you
            get". This means that the screen presentation almost completely
            represents that which you will see on your printer. It also means
            that you can have the current screen contents sent to the printer at
            any stage during processing. With a consequent realization of this
            principle, the screen would have to be refreshed after every
            alteration you make. For reasons of efficiency, and as this can take
            several seconds for complex screen contents, the GGU-GABION screen
            is not refreshed after every alteration. If you would like to
            refresh the screen contents, you may press either the [F2] key, or
            the [Esc] key. The [Esc] key will additionally set the screen
            presentation to A4. The "What you see is what you get" principle
            provides the possibility of sending the current screen contents to
            the printer at any time during processing (including during input).
            Select the menu item "File / Print" and then the "Printer" button
            Use of any True-type fonts, guaranteeing an excellent layout
            Colour presentation of almost all system geometry. The colors can be
            freely specified by the user. In particular, the soil layers can be
            color-filled The colors can also be specified
            Zoom function
            Mini-CAD system (additional labeling, lines, rectangles, circles,
            Bitmap graphics et

            System requirements
            GGU-Software runs on PCs with the following specifications:
            • Pentium I or higher processor
            • minimum 32MB memory
            • Microsoft Windows 2000, XP, Vista
            • 10MB free hard disk space
            • CD-ROM drive (for installation)
            • VGA or higher resolution monitor